P574 202 Cycle & Tool Store
Summary
AI generated summary
Proposed design details for a new tool and cycle store serving two new-build semi-detached dwellings on land next to a council car park (June 2019). The drawing provides front, rear, and side elevations, a plan, and a section showing two separate 7.2m² stores. External materials and rainwater goods are to match the main dwelling, with exposed rafter feet and close boarding for eaves detailing. Cycle store doors are to have PAS 24 “secure by design” locks, and ventilation is provided by diagonally opposed clay air bricks. Construction notes include twin-leaf walls with facing brickwork, blockwork, DPC, wall ties, fire-stopping at the separating wall/roof junction, a breathable roof underlay, and C16 timber rafters and wall plates with specified fixings. The base is a reinforced concrete slab on sand blinding, compacted Type 1 fill, and a DPM, with foundations subject to ground conditions.
Document Viewer
note:
- external facing, materials to match dwelling
- cycle store entry doors to be fitted with PAS 24 "secure by design locks".
Elevations
- FRONT ELEVATION
- REAR ELEVATION
- SIDE ELEVATION A
- SIDE ELEVATION B
- ELEVATION A
- ELEVATION B
METERS @ 1:50 0 1 2 3 4 5
Plan / Spaces
- RWP
- RWP
- CYCLE/TOOL STORE 7.2M²
- CYCLE/TOOL STORE 7.2M²
Key Dimensions / Notes
FRONT REAR 4040 553 4265 3835 4265 1813 100 215 100 1813 215 215 553
2no. 215x225 clay air bricks diagonally opposed
215x225 clay air bricks
exposed rafter feet detailing to match main building
rainwater goods to match main building
1023 890 1023
Wall Legend
- 100mm face brickwork
- 100mm face brickwork
- 100mm concrete block
- 100mm concrete block
- 100mm concrete block
Construction Notes
- space wall ties 750mm horizontally & 450mm vertically on twin leaf walls
- 40° facing brickwork to external skin to lpa approval (as main building)
- dpc
- 100X50 C16 wall plate held down with L shaped galvanized steel straps @2000mm (maximum) ctrs
- 100x25 close boarding fixed between exposed rafters to mask felt from underside. boarding to be painted or stained to match weathering goods and joinery
- 1 layer of PROCTER roofshield breathable underlay fixed to top-side of rafters
- 125 x 50 C16 rafters @ 400 centres
- heritage rainwater goods as main building
- 100 x 50 C16 wall plate's fixed to seperating wall using M10 rawlbolts or similar @ no less than 400 centres
- junction between separating wall & underside of roof filled with fire stop flexible closer
- install propriety eaves protection device such as tyvek eaves carrier or similar
2385
Slab / Groundworks
- R/C slab to structural engineers' details
- 50mm thick well compacted sand blinding
- 150mm thick (min) fully compacted DOT type 1 granular fill below slab
- 1200 gauge dpm below r/c
NOTE: possible revert to conventional footings depending on ground conditions & tree consultants approval. tbc on site
AVON PROJECT SERVICES
Tel/Fax: 01425 472217
3 Wren Close, Hightown, Ringwood, Hants, BH24 3RF
Revisions / Amendments
REV BY DATE DESCRIPTION
General Notes
- Original scale size 100mm-this drawing may have been reduced
- scaling for reference only, written dimensions shall govern
- ã copyright APS ltd. all rights reserved. this drawing may not be copied or re-used in whole or in part, without the written consent of APS ltd.
Company / Contact
Building Design & Technology
Web: avonserve.com
e: info@avonserve.com@
Project Information
| SITE: | BURLEY NFNP AUTHORITY |
|---|---|
| CLIENT: | AS PROPOSED |
| DWG. TITLE: | TOOL & CYCLE STORE DETAILS |
| PROJECT: | 2 NEW-BUILD SEMI-DETACHED DWELLINGS LAND ADJACENT TO COUNCIL CAR PARK, JUNE 2019 |
| DWG. No. | P574/202 |
| revision: | 2 |
| DWG. STATUS: | SA |
| date: | JUNE 2019 |
| Date: | JUNE 2019 |
| scale: | A1 1:50 & AS NOTED |
| checked by: | PA |
| drawn by: | ////// ////////// / // //////// |