Proposed Visitor Centre Elevation
Summary
AI generated summary
Proposed plans and elevations for a new visitor centre on land next to a council car park in Burley, prepared for planning approval (March 2018) by Avon Project Services. The sheet shows front, rear, and side elevations, an indicative section, and ground and first floor layouts at 1:100 scale. The design includes a pitched roof and specified external finishes such as roof covering, timber weatherboarding, and a face-brick plinth, all subject to local planning authority approval. The ground floor provides an entrance porch, display/shop areas, store room, staff office, staff galley/mess, cleaners area, corridor, and a unisex disabled WC, with fire exits indicated. The first floor includes additional display/meeting room space and access via stairs and a lifting platform. Notes state dimensions must be verified on site and the drawing is not for construction.
Document Viewer
Front Elevation
Rear Elevation
Levels (Meters)
- FFL
- GFL
- Meters: 0 1 2 3 4 5 6 7 8 9 10
Notes / Materials
- roof covering to lpa approval
- timber weather boarding to lpa approval
- face brick plinth to lpa approval
- roof covering to lpa approval
Ground Floor Plan
- FIRE EXIT
- up
- LIFTING PLATFORM
First Floor Plan
- FIRE EXIT
- up
Meters @ 1:100
0 1 2 3 4 5 6 7 8
Front
Rear
Elevation A
Elevation B
- unisex disabled wc
- entrance porch
- down
- LIFTING PLATFORM
- FIRE EXIT
- down
- display area/meeting room
- display area/meeting room
- display area/shop
- display area/shop
- store room
- staff office
- staff galley/mess
- cleaners
- corridor
Dimensions
- 2.40m
- 2.40m
- 1.58m
- 1.58m
- 2.40m
- 1.58m
- 1.58m
- 2.40m
Side Elevation A
Side Elevation B
Indicative Section
Levels (Meters)
- GFL
- FFL
- Meters: 0 1 2 3 4 5 6 7 8 9 10
Tel/Fax: 01425 472217
3 Wren Close, Hightown, Ringwood, Hants, BH24 3RF
AVON PROJECT SERVICES
Revisions / Amendments
| Rev | By | Date | Description |
|---|---|---|---|
| Original scale size 100mm - this drawing may have been reduced | |||
General Notes
scaling for reference only, written dimensions shall govern
copyright APS ltd. all rights reserved. this drawing may not be copied or re-used in whole or in part, without the written consent of APS ltd.
| Site: | BURLEY |
|---|---|
| Client: | NFNP AUTHORITY |
| Revision: | |
| DWG. Title: | PROPOSED PLANS & ELEVATIONS |
| Project: | NEW VISITOR CENTRE LAND ADJACENT TO COUNCIL CAR PARK, |
| DWG. Status: | AS PROPOSED |
| DWG. No. | P574/13 |
| Date: | MARCH 2018 |
| PA Date: | MARCH 2018 |
| Checked by: | SA, WL |
| Drawn by: | |
| A1 scale: | 1:100 |
Building Design & Technology
Web: avonserve.com e: info@avonserve.com
- this drawing is suitable the purposes of obtaining local planning authority approvals only. this is not a working drawing
- superstructures shown are indicative and are subject to a structural engineers full feasibility appraisal.
- all final dimensions are to be determined on site at the setting out stage of the works. discrepancies are likely, and if necessary are to be verified with the client/agent before work proceeds.
- it is the responsibility of the client and the appointed building contractor to observe all relevant health and safety rules including the construction-design-management (CDM 2015) regulations, as well as any others that may apply such as the party wall act and the construction act